32YB2
More powerfull!!For large and difficult-to-cut material. / High speed!!Eliminated wasteful idle time.
- Power up main spindle motor
($1: 3.7→5.5kW、$2: 2.2→3.7kW) - Rapid feed rate speed：X1 ： 20m/min.
Z1、Y1、Z2、Y2 ： 28m/min.
X2 ： 25m/min. - New CNC M70V (MITSUBISHI) built-in
(PLC computing power:4 times the speed of conventional model)
- Operation panel
Mitsubishi M70V built-in. Rapid feed rate speed( X1 ： 20m/min. ／ Z1、Y1、Z2、Y2 ： 28m/min. ／ X2 ： 25m/min.)
- Main Spindle
Difficult-to-cut-material can be machined in easier by the main spindle with 5.5kW.
- Back Spindle
Power up Back Spindle motor 3.7kW
- Casting
Our casting supports accuracy and rigidity.
- Chip tank
The chip tank is specious. There is a large-capacity cutting oil tank under the chip tank. Provided sufficient oil and prevented from increased temperature.
- Parts conveyor
Finished parts are taken out of the machine with parts conveyor and are placed in stock on the parts receiver(oil-bath style).
- Tool Post
High efficiency production and complicated machining can be possible by the optimum alignment of $1 and $2. Tool post is made of special casting iron which is strong for abrasion resistance. Sliding surface is crafted by scrapers, which ensures longer-lasting and high rigid.
- Main Tool Post
-
Tool Name Size Standard OD Tool □16×5 ID Tool 4
(ER16×3 + ER20×1)Live Tool 6
(ER16×1 + ER20×5)Option E unit 3 Live tool
(ER16×1 + ER20×2)
3 off-center tool (ER11)Option OD Tool 口20×6
(Direct mount type)
- Back Tool Post
-
Tool Name Size Tool Type A
(Standard)OD Tool □16×2 ID Tool ER16×3 Live Tool ER16×2 Tool Type B
(Option)OD Tool □16×1 ID Tool ER16×3 Live Tool ER16×3 Tool Type C
(Option)OD Tool □12×1 ID Tool ER16×3 Live Tool ER16×1 Off-center Tool ER11×3 ID Tool
(Option)ER20×3
- Tool presetter
Nomura's original "Tool Presetters" increase machine utilization through "off machine" tool presetting of quick change tooling, reducing the time required to replace and adjust tools up to 60%. The Nomura Tool Presetter is a microscope-type unit that presets a turning tool to the same gauge length. This makes programming and operation much easier. It also makes it unnecessary to "touch off" tools after they are mounted on the machine, making the tool change process a 2-screw operation. With this unit, tooling can be set up even while the machine is running parts. Tooling can be quickly changed, and you can get back into operation fast.
- Safety System (Standard Equipment)
-
- Coolant oil cut-off detecton
- Stops the machine automatically when the pressure of coolant oil decreases below specified level.
- Door safety interlock switch
- Causes the main power breaker to trip and the power to shut down when electric cabinet cover is opened.
- Lightning surge protection function
- Protects electronic circuit from high voltage to shutdown noise such as lightning.
- Auto power interception
- Switches off the power breaker on the machine automatically when the machine is stopped during the automatic operation for any reason.
- Main spindle load detection mode
- Stops the machine detecting defects in the main spindle when standard load and actual main spindle load are different.
- Cut-off tool breakage detector
- Stops the machine automatically detecting materials that cannot be completely cut-off due to the breakage failure of the parting tool.
- Tap breakage detector(Option)
- Stops the machine automatically detecting broken tap while processing the edge face of the tap.
- Optional Accessories
-
-
- Automatic fire extinguisher
- Automatically put out the fire and breaks the power source when fire happens.
-
- Oil mist collector
- Collects floating mist and helps for better working environment.
-
- Signal warning light. 3-stage type.
- Facilitate confirmation in the distance on how the machine is working.
-
Specification Item
| Specification Item | Specification Value | |
|---|---|---|
| Machining Capacity | Max. Machining diameter | φ32mm (Option.φ25mm) |
| Max. Machining length | 190mm /1 chuck | |
| Max. Parts unloading length | 93mm | |
| Main Spindle | Main spindle through-hole diameter | φ37mm (φ27mm) |
| Main spindle RPM | 8,000r.p.m. max. | |
| $1 | Max. no. of tools (as standard) | 22 |
| OD (□16×150mmMax) | 5 | |
| ID Frontal hole | 4 (ER16×3 + ER20×1) | |
| Live tool | 6 (ER20×5 + ER16×1) | |
| Max. frontal drill diameter | φ13mm | |
| Max. frontal drill length | 50mm | |
| Max. frontal tap diameter | M10×1.5 | |
| Max. live tool spindle drill diameter |
φ8mm | |
| Max. live tool spindle tap diameter |
M8×1.25 | |
| Live main tool spindle | 6,000r.p.m. max. | |
| $2 | OD (□16×150mmMax) | 2 |
| ID Frontal hole | 3 (ER16) | |
| Live tool | 2 (ER16) | |
| Max. frontal drill diameter | φ8mm | |
| Max. frontal drill length | 60mm | |
| Max. frontal tap diameter | M8×1.25 | |
| Max. live tool spindle drill diameter |
φ6mm | |
| Max. live tool spindle tap diameter |
M6 | |
| Feed rate | X1 ： 20m/min. Z1、Y1、Z2、Y2 ： 28m/min. X2 ： 25m/min. |
|
| Min. command unit | 0.0001mm | |
| C-axis min. command unit ($1･2) |
0.0001° | |
| Motor | Main spindle motor | 3.7/5.5kW |
| Live tool motor | 0.75/1.5kW | |
| Sub spindle motor | 1.5/3.7kW | |
| Sub live tool motor | 0.75/1.5kW | |
| X1、Y1、Z1、X2、Y2、Z2 | 1.0kW | |
| Coolant pump | 0.25kW×2 | |
| Lubricant pump | 0.003kW | |
| Dimensions and others |
Main spindle center height | 1,000mm |
| Input power capacity | 25kVA | |
| Pneumatic pressure & flow rate | 0.5MPa、6.4L/min. | |
| Coolant tank | 100L | |
| Lubricant tank | 0.8L | |
| W×D×H | 2,275×1,185×1,825mm | |
| Weight | 3,030kg | |
| NC Standard Function | MITSUBISHI NC | M70V TypeA |
| NC display (10.4 color TFT LCD) | ||
| Machining program memory capacity | 1,280m | |
| Number of tool off-set correction | 40pcs. | |
| Background programming editing function | ||
| Main spindle C-axis function | ||
| User macro function | ||
| Tool nose wear compensation | ||
| Corner chamfering / Corner rounding | ||
| Fixed cycle | ||
| Complex fixed cycle | ||
| Serial In / Output interface | ||
| CF Card interface | ||
Standard Accessories
- ID attachment
- Live tool unit
- Back tool unit A
2OD tool + 3 ID tool + 2 Live tool - Main spindle cooling unit(for main and back)
- Synchronous rotary guide bush unit / transmission unit
- Drill holder
- Tap holder
- Tool holder
- Main: Chuck sleeve / Spring / Spindle cap(1 set)
- Back: Chuck sleeve / Spring / Spindle cap(1 set)
- Auto power interception
- Automatic lubricator(with level detector)
- Coolant oil unit(for main and back)
- Coolant oil cut-off detector (for main and back)
- Main spindle load detection mode
- Door safety interlock switch
- Working light (LED light)
- Parts conveyor (with parts recever and basket)
- Parts catcher
- Leveling pads
Optional Accessories
- $1
- 3 ID attachment (ER20×3)
- E unit
3 Live tool (ER16×1 + ER20×2)
+ Off-center drill (ER11)
- $2
- Back tool Type B
1 OD tool (口16) + 3 ID tool (ER16) + 3 Live tool (ER16) - Back tool Type C
1 OD tool (口12) + 3 ID tool (ER16) + 1 Live tool (ER16) + 2 Off-center drill(ER11)
- Back tool Type B
- Sleeve & nut for synchronous rotary bush
- Fixed guide bush unit
- Bush sleeve & nut for fixed guide bush
- Tap breakage detector (for main and back)
- REGO-FIX cap & wrench
- Tool presetter
- Manual pulse generator 37P
- NC display lanuage(English / Chinese / Korean and others)
- Singal warning light(1-stage and 3-stage type)
- Chip conveyor
- Medium pressure coolant
- Automatic fire extingushisher
- Dent preventive kit
- Oil mist collector
- Specified color
- Tooling
- Working tool kit
- NC manual
- Note:
- The above-mentioned machine capability is for the case when work material is SUS303.
Depending on the processing condition such as the quality of work material and the tools to be used, machine capabilities values may differ from the above-mentioned values. - The specification is based on the specifications applied within Japan. Specifications are subject to change without notice.
- This product could be classified as strategic item or other export regulated under the Foreign Exchange and Foreign Trade Law. Contact our sales representative when exporting this product.
