NN-32UB8
32 Type is coming out in UB Series.
- Simple & Compact.
- Sliding guide is adapted for Y1 Axis table slide.
- Special high wear resistant casting makes longer life and higher rigidity possible.
- More cutting variation and shorter cycle time.
-
-
Main Side Tool OD 5 □12×4、□16×1 ID 4 ER16×4 CROSS 4 ER16×4
-
Sub Side Tool OD -- ID 3 ER16×3 LIVE 3 ER16×3
M70V
USB Memory Interface
Built-In Spindle Motor Max8,000rpm
Specifications
| Specifications | NN-32UB8 | |
|---|---|---|
| Max.Machining diameter | φ32mm | |
| Max.Machining length/1chuck | 190mm | |
| Main/Back spindle RPM | Max 8,000rpm r.p.m / Max 6,000 r.p.m | |
| Max.Number of Tools | 19 | |
| Feed Rate X1/Y1/Z1/X2/Z2 | 24m/min | |
| Main spindle | 3.7/5.5kW | |
| Main tool spindle drive | 0.75kW | |
| Back tool spindle drive | 0.75kW | |
| W×D×H | 2501×1003×1675mm | |
- Note
- Depending on the processing condition such as the quality of work material and the tools to be used, machine capabilities values may differ from the above-mentioned values.
- Specifications are subject to change without nolice.
- This product couldbe classified as strategic item or other export regulated under the Foreigh Exchange and Foreign Trade Law.Contact our sales representative when exporting this product.
